Owners manual

ManualsBrandsCorsa Performance ManualsAutomotive24873 Sport Cat-Back Exhaust System

IMPORTANT WARRANTY & INSTALLATION

INSTRUCTIONS ATTACHED

Please Forward All Attached Information to Consumer

Warranty Not Valid Unless Returned to CORSA Performance

To Activate Your 10 Year LIMITED WARRANTY,

Go to: www.corsaperformance.com/Warranty

For Full-Color Installation Instructions, Please Visit:

CORSAPERFORMANCE.COM and Search by Part Number

Please be sure to review the enclosed instructions prior to beginning the installation process. If you

have any questions about the enclosed parts, instructions or encounter a problem during installation:

CALL CORSA PERFORMANCE TECHNICAL ASSISTANCE AT 440.891.0999

CORSA Performance · 140 Blaze Industrial Parkway · Berea, OH 44017

Ph (440) 891.0999 E-Mail: techsupport@tmgperformance.com · www.corsaperformance.com

STOP

Summary of content (5 pages)

PAGE 1
IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Performance To Activate Your 10 Year LIMITED WARRANTY, Go to: www.corsaperformance.com/Warranty STOP For Full-Color Installation Instructions, Please Visit: CORSAPERFORMANCE.COM and Search by Part Number Please be sure to review the enclosed instructions prior to beginning the installation process.
PAGE 2
dB Performance Exhaust System Installation Cat-Back Exhaust System 2014 5.3L Silverado Sierra SSE PN 24872 (133” WB); PN 24873 (143.5” WB); PN 24874 (153” WB) Please take time to read and understand these installation instructions. We recommend that the installation of this system be performed by a qualified service center or professional muffler installer who has the necessary equipment, tools and experienced personnel.
PAGE 3
dB Performance Exhaust System Installation Cat-Back Exhaust System 2014 5.3L Silverado Sierra SSE PN 24872 (133” WB); PN 24873 (143.5” WB); PN 24874 (153” WB) Removal of Stock System: 1) Scribe a line 12” from the front face of the stock muffler. (See Fig. A) 2) Place a chain style cutter around the exhaust pipe and at the scribe line location and cut the exhaust pipe. (See Fig.
PAGE 4
dB Performance Exhaust System Installation Cat-Back Exhaust System 2014 5.3L Silverado Sierra SSE PN 24872 (133” WB); PN 24873 (143.5” WB); PN 24874 (153” WB) Installation of dB Exhaust System: NOTE: The supplied double edge clamps in this system will crush and permanently deform the exhaust piping as they are tightened. DO NOT tighten these clamps any more than is necessary to lightly hold the exhaust components in place, until the very end of this installation process.
PAGE 5
dB Performance Exhaust System Installation Cat-Back Exhaust System 2014 5.3L Silverado Sierra SSE PN 24872 (133” WB); PN 24873 (143.5” WB); PN 24874 (153” WB) 3 Slide the pipe over the muffler outlet and place the hangers into the factory grommets. From the rear of the vehicle slide the tailpipe over the axle while holding the rear differential vent hose out of the way. Slide a supplied 3” clamp over the inlet of the tailpipe. Pre-tighten the clamp.