Owners manual

INS5401
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
14
10/1/2017
[e-mail] l www.corsaperformance.com
2015-2017 FORD MUSTANG GT 5.0L V8
Long Tube Headers: 1.875” Primary, 3.0” Collector
Part #: 16017, 16117
INSTALLATION INSTRUCTIONS
CORSA EXHAUST
23. Secure the top of the engine mounts with the
nuts removed during Removal Step 6, using
extensions, a ratchet, and a 15mm socket.
PRO TIP: “Wobble” extensions make this step
easier but a normal swivel section can be used.
Also, it is possible to do this from the bottom with
a “stubby” wrench.
24. In the engine bay, reinstall the air intake box and
secure it with the bolt from Removal Step 5.
Tighten the hose clamp with a flathead screw
driver or nut driver. Connect the airflow sensor
cable and lock in place with the red tab. Connect
the breather hoses to the intake duct.
25. Reinstall the engine cover and press into place.
Reinstall the strut tower bar, if present, (from
Removal Step 2 and secure with the shock
mount nuts, 15mm socket and ratchet.
26. Reconnect the negative battery cable.
NOTE: Immediately following the installation of your exhaust system, you may experience a trace of smoke
after initial start-up. DO NOT be alarmed. The smoke is caused by the burning of a small amount of forming oil
residue used in the manufacturing process.
NOTE: It is strongly suggested that all clamps be checked and tightened after road testing the vehicle once the
system has cooled.