Owners manual

INS5401
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
12
10/1/2017
[e-mail] l www.corsaperformance.com
2015-2017 FORD MUSTANG GT 5.0L V8
Long Tube Headers: 1.875” Primary, 3.0” Collector
Part #: 16017, 16117
INSTALLATION INSTRUCTIONS
CORSA EXHAUST
13. Install the rear O2 sensors into the CORSA
flanged adapter pipes with O2 bung. The adapter
pipes are symmetrical for driver and passenger.
Ensure the O2 sensors are installed on the
correct side of the vehicle.
14. Locate one of the 3” clamps from the adapter
hardware kit along with one of the expanded
outlet adapter elbows. The outlet elbows are
symmetrical for driver and passenger. Assemble
the passenger side adapter pipe, clamps, and
outlet elbow as shown.
15. Install one of the donut gaskets on the
passenger side header collector. Insert the outlet
elbow into the inlet side of the CORSA X-Pipe.
16. Adjust the pipe so the flared end (with the flange)
aligns to the spherical donut gasket.
17. Secure the flange with four bolts and four nuts
from donut gasket kit. Install the bolts so the
head of the bolt is forward in the vehicle. The
nuts have a locking thread design so they are not
able to be finger tightened. Tighten the nuts only
enough to snug the flared adapter onto the
gasket and still allow some movement.
Continued on Next Page . . .
Adapter Pipe
Outlet Elbow
Clamp
From CORSA X-Pipe