Owners manual

INS5403
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
15
10/1/2017
[e-mail] l www.corsaperformance.com
2011-2014 FORD MUSTANG GT 5.0L V8
Long Tube Headers: 1.875” Primary, 3.0” Collector
Part #: 16016, 16116
INSTALLATION INSTRUCTIONS
CORSA EXHAUST
25. In the engine bay, reinstall the air intake box and
secure it with the bolt from Removal Step 6.
Tighten the hose clamp with a flathead screw
driver or nut driver. Connect the airflow sensor
cable and lock in place with the red tab. Connect
the breather hoses to the intake duct.
26. Reinstall the engine cover and press into place.
Reinstall the strut tower bar, if present, (from
Removal Step 4 and secure with the shock mount
nuts, 15mm socket and ratchet
27. Reinstall battery, battery tray, and the battery
blanket insulation from Removal Steps 2 & 3.
28. Reconnect the negative battery cable.
NOTE: Immediately following the installation of your exhaust system, you may experience a trace of smoke
after initial start-up. DO NOT be alarmed. The smoke is caused by the burning of a small amount of forming oil
residue used in the manufacturing process.
NOTE: It is strongly suggested that all clamps be checked and tightened after road testing the vehicle once the
system has cooled.