Owners manual

INS5356
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
6
03/19/2018
[e-mail] l www.corsaperformance.com
2009-2017 NISSAN GT-R
3.5” Cat-Back, Dual Rear Exit w/ Quad 5.0" Titanium Tips
Part #: 14999, 14999BLK, 14999BRZ (Tip Kit: 14998, 14998BLK, 14998BRZ)
REMOVAL INSTRUCTIONS
FACTORY EXHAUST
10. Remove the two nuts at the center exhaust
flange using a 14mm socket and ratchet.
11. Remove the two nuts securing each of the
exhaust hanger grommets to the chassis just in
front of the rear muffler using a 12mm socket
and ratchet, and a long extension. Save Nuts for
Install Step 7.
12. The use of a second person is recommended. Remove the two nuts securing each of the exhaust
hanger grommets just behind the rear muffler to the chassis using a 12mm socket and ratchet, and a
long extension. Carefully remove the rear exhaust section by sliding it rearward off the studs on the front
exhaust section. Let the exhaust drop down to free the hanger grommets, then move the entire rear
section forward and down to free it from the vehicle. Save Nuts for Install Step 7.
13. Remove the two nuts at each of the front exhaust flanges using a 14mm socket and ratchet, and a long
extension. Carefully remove the front exhaust section by sliding it rearward and down off the studs from
the stock downpipe to free it from the vehicle.
Continued on Next Page . . .