Owners manual
INS5356
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
4
03/19/2018
techsupport@tmgperformance.com l www.corsaperformance.com
2009-2017 NISSAN GT-R
3.5” Cat-Back, Dual Rear Exit w/ Quad 5.0" Titanium Tips
Part #: 14999, 14999BLK, 14999BRZ (Tip Kit: 14998, 14998BLK, 14998BRZ)
REMOVAL INSTRUCTIONS
FACTORY EXHAUST
3. Remove the 8 smaller sized bolts on the center under tray section using a 10mm socket and remove
tray from the vehicle. WARNING: Carefully set the center under tray in a safe location until reinstalled.
4. Start on the left side and remove the two larger sized under tray bolts using a 12mm socket and ratchet.
Remove the one small bolt with a 10mm socket and ratchet and remove the left side under tray from the
vehicle. Set aside in a safe location until reinstalled. Repeat on the right side under tray.
5. Remove the four nuts securing the rear mounting brace with a 10mm socket and ratchet and remove it
from the vehicle.
Continued on Next Page . . .