Owners manual

INS5356
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
3
03/19/2018
[e-mail] l www.corsaperformance.com
2009-2017 NISSAN GT-R
3.5” Cat-Back, Dual Rear Exit w/ Quad 5.0" Titanium Tips
Part #: 14999, 14999BLK, 14999BRZ (Tip Kit: 14998, 14998BLK, 14998BRZ)
CAUTION: Never work on a hot exhaust system. Allow the vehicle to cool for at least an hour and a half. Always wear eye
protection when working under a vehicle. It is recommended to use cotton gloves in order to protect stainless steel
surfaces from permanent grease and oil stains.
NOTE: The rear underbody paneling and related bracketry must be removed to allow access to the factory exhaust
system and its mounting locations. This is detailed in Steps 1-6 of the removal process. Set aside all mounting hardware to
be reused during the installation process.
REMOVAL INSTRUCTIONS
FACTORY EXHAUST
1. Remove the 11 plastic clips on the center and side under paneling with a clip removal tool.
2. Remove the 15 larger sized bolts on the center under tray using a 12mm socket and ratchet.
Continued on Next Page . . .