Owners manual

03/23/16
INS5316
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Cat Back Exhaust System
Dual Rear Exit
2015 Dodge Charger & Challenger 6.4L V8
PN 14993, 14994, 14995(BLK), 14996(BLK)
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
NOTE: The installation of this Corsa Performance Exhaust system requires cutting and clamping onto the stock
active valves. The presence of the active valves is needed to achieve the acoustic target of the system.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive long extension
 3/8” drive swivel adapter
 3/8” drive 13mm short socket
 3/8” drive 15mm deep socket
 Grommet pullers
 Soap and water solution
 Torque Wrench
 Chain cutters
 File or deburring tool
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
14993
Bill of Materials
1. 17CH4296 – X-PIPE ASSEMBLY CHALLENGER
2. 18LC2023 – REAR MUFFLER ASSEMBLY DRIVER
3. 18LC2024 – REAR MUFFLER ASSEMBLY PASSENGER
4. 18LC2035 – TUNNEL MUFFLER ASSEMBLY DRIVER
5. 18LC2036 – TUNNEL MUFFLER ASSEMBLY PASSENGER
6. 18LC4019 – AXLE PIPE ASSEMBLY DRIVER
7. 18LC4020 – AXLE PIPE ASSEMBLY PASSENGER
8. 18LC7015 – HARDWARE KIT