Owners manual

06/10/15
INS5332
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Cat Back Exhaust System
Dual Rear Exit
2015+ Dodge Charger & Chrysler 300 5.7L V8
PN 14972 & 14973
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive 13mm socket
 3/8” drive 15mm deep socket
 3/8” drive long extension
 Grommet pullers
 Soap and water solution
 Torque Wrench
 Penetrating lubricant spray
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 17CH4018 – XO Pipe Assembly
2. 18LC2000 – Extreme Tunnel Muffler Assembly (2x)
(for Kit 14973)
3. 18LC2001 – Rear Muffler Assembly – Driver
4. 18LC2002 – Rear Muffler Assembly – Passenger
5. 18LC4000 – Axle Pipe Assembly – Passenger
6. 18LC4001 – Axle Pipe Assembly – Driver
7. 18LC7010 – Hardware Kit
8. 19FL2000 – Sport Tunnel Muffler (2x)
(for Kit 14972)