Owners manual

9/6/2017

INS5287

CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868

E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m

Cat Back Exhaust System

2015+ Chevrolet Tahoe

2015+ Yukon/6.2L Denali, Escalade/ESV

Single Side Exit w/ Twin 4.0” Pro-Series Tip

PN 14859 & 14859BLK, 14826 & 14826BLK

Please take time to read and understand these installation instructions.

CORSA recommends that the installation of this system be performed by a qualified service center or professional

muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to

perform this install, the use of a hoist and an additional person will be required.

CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when

working under a vehicle.

Recommended Tools:

 3/8” drive ratchet

 3/8” drive 13mm shallow socket

 3/8” drive 15mm deep socket

 Small, flat head screw driver

 Chain style pipe cutter

 Grommet pullers

 Spare tire removal kit

 Soap and water solution

 Torque Wrench

 Safety glasses

Please confirm that all parts are present according to the bill of materials before beginning the installation.

If something is missing call Tech Support at 1- 800-486-0999

Bill of Materials

1. 16TA2019 – Muffler Assembly

2. 16TA3000(BLK) – Tip Assembly

3. 16TA4039*** – Head Pipe Assembly

4. 16TA4042 – Tail Pipe Assembly

5. 20FF7026 – Hardware Kit

*** - 6.2L kits, Corsa p/n 14826 & 14826BLK use

head pipe p/n 16TA4049, NOT 16TA4039 ***