Owners manual

4/8/2015

INS5329

CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868

E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m

Cat Back Exhaust System

Single Side Exit w/ 4.0” Pro-Series Tips

2015+ Ford F150

PN 14836 & 14836BLK and 14837 & 14837BLK

Please take time to read and understand these installation instructions.

CORSA recommends that the installation of this system be performed by a qualified service center or professional

muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to

perform this install, the use of a hoist and an additional person will be required.

CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when

working under a vehicle.

Recommended Tools:

 3/8” drive ratchet

 3/8” drive 13mm socket

 3/8” drive 15mm deep socket

 10” 3/8” ratchet extension

 Grommet pullers

 Soap and water solution

 Torque Wrench

 Penetrating lubricant spray

 Safety glasses

Please confirm that all parts are present according to the bill of materials before beginning the installation.

If something is missing call Tech Support at 1- 800-486-0999

Bill of Materials

1. 13MV7057 – Hardware Kit

2. 16TA3000 – Tip Assembly

3. 20FF2025 – Rear Muffler Assembly (5.0L)

4. 20FF2027 – Rear Muffler Assembly (2.7L/3.5L)

5. 20FF4145 – Tailpipe Assembly