Owners manual

02/23/2017
INS5317
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Axle Back Exhaust System
Dual Rear Exit w/ Twin 4.0” Pro-Series Tips or
Dual Rear Exit w/ Single 4.5” Pro-Series Tips
2016+ Chevrolet Camaro SS 6.2L V8
PN 14784(BLK), 14785(BLK), 14786(BLK), 14787(BLK)
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive torque wrench
 3/8” drive 15mm deep socket
 Tape measure & Marker
 Saw or chain-style pipe cutter
 File or sanding device for de-burring
 Grommet pullers
 Soap and water solution
 Torque Wrench
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 16CM2000 – Xtreme Muffler Assembly – Passenger
16CM2008 – Sport Muffler Assembly – Passenger
2. 16CM2001 – Xtreme Muffler Assembly – Driver
16CM2009 – Sport Muffler Assembly – Driver
3. 16CM3000 – Twin Tip Assembly – Passenger
16CM3002 – Single Tip Assembly - Passenger
4. 16CM3001 – Twin Tip Assembly – Driver
16CM3003 – Single Tip Assembly - Driver
5. 16CM7005 – Hardware Kit