Owners manual

08/18/2017
INS5283
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Double Helixx X-Pipe
2014+ C7/C7 Z06 Corvette
PN 14761
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet and short extension (3”)
 3/8” drive 18mm deep socket
 3/8” drive 15mm deep socket
 3/8” drive 13mm shallow and deep sockets
 Small flathead screwdriver
 15mm wrench
 Grommet pullers
 Soap and water solution
 Torque Wrench
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 16CN4018 – Double Helixx X-Pipe Assembly
2. 16CN7020 – Hardware Kit