Owners manual

06/02/17

INS5351

CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (440) 891.0999 · F: (440) 891-1868

E - M a i l : s a l e s @ C O R S A p e r f o r m a n c e . c o m · w w w . C O R S A p e r f o r m a n c e . c o m

Cat-Back Exhaust System

Dual Rear Exit w/ 5.0” Straight Cut Tips

2017+ Ford F150 Raptor 3.5L EcoBoost

PN 14397, 14397GNM, & 14397BPC

Please take time to read and understand these installation instructions.

CORSA recommends that the installation of this system be performed by a qualified service center or professional

muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to

perform this install, the use of a hoist and an additional person will be required.

CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when

working under a vehicle.

Recommended Tools:

 3/8” drive ratchet

 3/8” drive 10mm socket

 3/8” drive 15mm deep socket

 10” 3/8” ratchet extension

 Grommet pullers

 Soap and water solution

 Torque Wrench

 Penetrating lubricant spray

 Safety glasses

Please confirm that all parts are present according to the bill of materials before beginning the installation.

If something is missing call Tech Support at 1- 800-486-0999

Bill of Materials

1. 20FF2032 – Muffler Assembly

2. 20FF3008 – Tip - Passenger

3. 20FF3009 – Tip - Driver

4. 20FF4158 – Axle Pipe Assembly - Passenger

5. 20FF4159 – Axle Pipe Assembly – Driver

6. 20FF4160 – Tailpipe Assembly – Passenger

7. 20FF4161 – Tailpipe Assembly – Driver

8. 15AT7007 – Hardware Kit