Owners manual

02/10/2014
INS5193
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
3
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Cat Back Exhaust System Installation
2011-14 Ford F-150 Raptor 6.2L
Single Side Exit w/ Twin 4.0” Pro-Series Tips
PN 14387, 14387BLK, 14760, 14760BLK
Recommended Tools for Resonator Delete Kit:
 13mm deep socket
 14mm deep socket
 15mm deep socket
 Ratchet
 14mm wrench
 Penetrating lubricant
 Safety glasses
 Torque wrench
Removal of Stock System
1. Remove both bolts on the connecting flange of the resonator using a 13mm socket and ratchet. (See Fig A.)
2. Loosen the clamp on the end opposite of the flange using a 15mm socket. (See Fig B.)
Note: Using a penetrating lubricant on the clamped area may aide in the removal of the resonator.
3. If removing resonator from completely stock system, rotate the resonator until the retaining boss on the stock exhaust
is aligned with the slot. (See Fig C.) (If removing stock resonator from the Corsa Performance cat-back exhaust, there
will be no retaining boss to align.)
4. The resonator is now ready to be removed from the vehicle.
FIG. A
FIG. B
FIG. C
For Technical Assistance:
Call 800.486.0999