Owners manual

ManualsBrandsCorsa Performance ManualsAutomotive14370 Exhaust X-Pipe Fits 11-14 Mustang

140 Blaze Industrial Pkwy, Berea, OH 44017 l Toll Free: 1.800.486.0999 l Fax: 440.891.1868 l www.corsaperformance.com

11-14 FORD

MUSTANG GT

IMPORTANT! WARRANTY AND

INSTALLATION INSTRUCTIONS

Please Forward All Information to Consumer

Be sure to review the enclosed instructions prior to beginning the installation process. If you have any

questions about the enclosed parts or instructions, or if you encounter a problem during installation:

CALL TECHNICAL SUPPORT: 440.891.0999 or 800.486.0999

COLOR INSTRUCTIONS ARE AVAILABLE BY PART NUMBER ON: CORSAPERFORMANCE.COM

NEVER work on a hot exhaust system.

Allow time for the vehicle to cool.

Always wear eye protection

when working under a vehicle.

INSTALL DIFFICULTY

RECOMMENDED TOOLS & SUPPLIES

 Torque Wrench

 15mm Socket or Wrench

 Flat Head Screwdriver

 13mm Socket or Wrench

TO ACTIVATE YOUR WARRANTY GO TO:

CORSAPERFORMANCE.COM/WARRANTY

Summary of content (5 pages)

PAGE 1
1-14 FORD MUSTANG GT IMPORTANT! WARRANTY AND INSTALLATION INSTRUCTIONS Please Forward All Information to Consumer Be sure to review the enclosed instructions prior to beginning the installation process. If you have any questions about the enclosed parts or instructions, or if you encounter a problem during installation: CALL TECHNICAL SUPPORT: 440.891.0999 or 800.486.0999 TO ACTIVATE YOUR WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY COLOR INSTRUCTIONS ARE AVAILABLE BY PART NUMBER ON: CORSAPERFORMANCE.
PAGE 2
011-14 FORD MUSTANG GT 5.0L V8 2.75” X-Pipe Part #: 14370 Please take time to read and understand these installation instructions. CORSA recommends that the installation of this system be performed by a qualified service center or professional installer who has the necessary equipment, tools, and experienced personnel. However, if you decide to perform this installation yourself, the use of an additional person may be required. WARNING: Never work on a hot exhaust system.
PAGE 3
2011-14 FORD MUSTANG GT 5.0L V8 2.75” X-Pipe Part #: 14370 CAUTION: Never work on a hot exhaust system. Allow the vehicle to cool for at least an hour and a half. Always wear eye protection when working under a vehicle. It is recommended to use cotton gloves in order to protect the stainless steel surface of the header from permanent grease and oil stains. REMOVAL INSTRUCTIONS 1. Using a 13MM socket or wrench, loosen the spherical clamps at the inlet of the H-pipe on the passenger side and driver side.
PAGE 4
2011-14 FORD MUSTANG GT 5.0L V8 2.75” X-Pipe Part #: 14370 WARNING! DO NOT SKIP THIS STEP! Apply the anti-seize lubricant (supplied) to the threads ONLY of all the clamps and flange bolts. Failure to follow this procedure can cause nuts to seize on clamps and potentially destroy threads. After applying anti-seize lubricant, be sure to thoroughly clean your hands, as lubricant will tarnish stainless steel. All clamps should be tightened using a properly calibrated Torque Wrench.
PAGE 5
2011-14 FORD MUSTANG GT 5.0L V8 2.75” X-Pipe Part #: 14370 INSTALLATION INSTRUCTIONS 5. Adding a 2.75” clamp to the inlet side of each CORSA Inlet Elbow Pipe. CORSA EXHAUST 6. Add a 70mm spherical clamp to the front of each CORSA Spherical Adapter. Insert the Spherical Adapter into the CORSA Elbow Pipe Inlet. Snug the spherical connection first, using a 13mm socket or wrench, followed by the Inlet Elbow connection, using a 15mm socket or wrench. 7.