Owners manual

02/17/2017
INS5343
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Cat Back Exhaust System
2016 Shelby GT350
PN 14348
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive torque wrench
 ¼’ drive 8mm socket
 3/8” drive 13mm socket
 3/8” drive 15mm deep socket
 Grommet pullers
 Soap and water solution
 Penetrating lubricant spray
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 15AT7007 – HARDWARE KIT
2. 20MU2105 – REAR MUFFLER ASSEMBLY PASS
3. 20MU2106 – REAR MUFFLER ASSEMBLY DRIVER
4. 20MU4078 – DOUBLE X-PIPE ASSEMBLY
5. 20MU4154 – X-PIPE INLET ADAPTER
6. 20MU4163 – AXLE PIPE ASSEMBLY – PASS
7. 20MU4164 – AXLE PIPE ASSEMBLY – DRIVER
8. 20MU7039 – VALVE ACTUATOR RELOCATION BRACKET (2)