Owners manual

09/07/2016
INS5321
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Cat Back Exhaust System
Dual Rear Exit w/ 4.5” Pro-Series Tips
2015 Ford Mustang GT 5.0L V8 Convertible
PN 14341(BLK) & 14342(BLK)
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive torque wrench
 3/8” drive 13mm socket
 3/8” drive 15mm deep socket
 Grommet pullers
 Soap and water solution
 Torque Wrench
 Penetrating lubricant spray
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 15AT7007 – Hardware Kit
2. 20MU2089 – Sport Muffler Assembly Pass
20MU2092 – Touring Muffler Assembly Pass
3. 20MU2090 – Sport Muffler Assembly Driver
20MU2093 – Touring Muffler Assembly Driver
4. 20MU3010 – Tip Assembly – Driver
5. 20MU3011 – Tip Assembly – Passenger
6. 20MU4076 – X-Pipe Inlet to Stock Adapter (2x)
7. 20MU4078 – Double X-Pipe Assembly