Owners manual

INS5297
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F: 440.891.1868
6
02/12/2018
[e-mail] l www.CORSAperformance.com
2015-2017 FORD MUSTANG GT 5.0L V8
3.0” Axle-Back Dual Rear Exit w/ Single or Quad Tips
Touring Part #: 14329 / BLK, 14336 / BLK - Sport Part #: 14326 / BLK, 14334 / BLK
INSTALLATION INSTRUCTIONS
CORSA EXHAUST
3. Locate one 3” clamp. Install the clamp on the
passenger side muffler inlet pipe so that the bolt
is vertical with the nut towards the ground and
the bolt is towards the inside of the vehicle
4. Slide the rear hanger into the rear hanger
grommet located on the vehicle above and just
inside of the passenger side tip cut out.
5. Slide the muffler inlet pipe over the passenger
side adapter. NOTE: The use of a soap and
water solution may aid in the installation of
hanger grommets.
6. Locate the 13mm bolt removed during Step 4 of
the stock exhaust removal process. Install the
front passenger hanger grommet assembly onto
the rear suspension sub-frame and tighten it
down with the 13mm bolt, 3/8” ratchet and 13mm
socket.
7. Tighten the clamp connecting the passenger
muffler inlet pipe to the 3” adapter using the
ratchet and 15mm deep socket until muffler
assembly is snug on the adapter.
Repeat Install Steps 2-6 on the driver side of
the vehicle.
Continued on Next Page . . .