Owners manual

09/25/2015
INS5293
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
3
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Clamp On Tip Assembly
2015-Current Ford Mustang GT - Roush
PN’s 14333 & 14333BLK
Polished & Black Quad 4.0” Pro
CORSA Tip Assembly Removal:
1. Loosen the two clamp bolts at the inlet of the current CORSA driver and passenger tip assemblies using a 15mm
socket and a 3/8” ratchet, and a short extension. (Fig. A)
2. CAREFULLY remove the tip assembly from the mufflers to free it from the vehicle. (Fig. B)
NOTE: Penetrating oil may help with removal process. Push up/down on the tip to open the notches, this will
make it easier to remove the tip assembly.
3. Store the tip assembly in a safe location. CORSA recommends wrapping the tip assembly in foam or something
soft and non-abrasive that will keep if from getting scratched or dented.
Fig. A Fig. B