Owners manual

09/25/2015
INS5293
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Clamp On Tip Assembly
2015-Current Ford Mustang GT - Roush
PN’s 14333 & 14333BLK
Polished & Black Quad 4.0” Pro
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
NOTE: The Corsa Quad Tip Kit can only be installed on a 2015-Current Ford Mustang GT 5.0L equipped with the
Premium Package and Roush rear valance.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive 15mm deep socket
 Short extension (3”)
 Torque Wrench
 Safety Glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. 20MU3016 – Passenger Tip Assembly
2. 20MU3017 – Driver Tip Assembly
3. 34GR7010 – Tip Hardware Kit