Owners manual
Recommended Tools:
• 13 mm Socket
• 15 mm Socket
• 18 mm Socket
• 15 mm Open End Wrench
• Torque Wrench
(20-100 ft.-lb.)
• Drive extensions for Ratchet
(MINIMUM OF 17 INCHES)
CORVETTE C6
1
CORSA Performance • 140 Blaze Industrial Parkway • Berea, Ohio 44017-2930 • P. 800.486.0999 • F. 440.891.1868
E-mail: sales@corsaperf.com • www.corsaperf.com
INS5118 2/14/11
Exhaust System Installation
CAUTION: Prior to installation, be sure your vehicle is parked on a level surface, and the exhaust system
is cool. For safety purposes and ease of installation, we urge you to take your vehicle to a qualified
service center or muffler installer that employs the use of a lift.
INSTALLATION NOTE: Be sure to apply the provided anti-seize lubricant to all bolts, fasteners and
clamps. A pouch is included with the hardware kit. Apply the supplied anti-seize lubricant to the
threads ONLY of all TORCA band clamps. Failure to follow this procedure can cause the nuts to seize
on clamps and potentially damage threads. WARNING: Be sure to thoroughly clean hands after use.
Anti-seize lubricant will tarnish stainless steel parts.
All Torca clamps should be tightened using a properly calibrated Torque Wrench. Using an air impact
gun will damage the clamp and reduce its ability to effectively seal the joint. It may also cause the joint to
separate thereby causing damage to your exhaust system and your vehicle.
PARTS LIST
SPORT SYSTEM (PN 14108):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2067)
1 Passenger Side Muffler Assembly (16CS2068)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
TOURING SYSTEM (PN 14113):
(SPORT + CONVERSION KIT)
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2067)
1 Passenger Side Muffler Assembly (16CS2068)
2 Tunnel Muffler Assemblies (16CS2006)
1 H-Pipe Assembly (16CS4124)
Hardware Kit (16CS7004):
4 Torca Clamps 2.5”
1 Package Anti-Seize
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
CONVERSION KIT (PN 14310):
2 Tunnel Muffler Assemblies (16CS2006)
1 H-Pipe Assembly (16CS4124)
Hardware Kit (16CS7004):
4 Torca Clamps 2.5”
1 Package Anti-Seize
3.5” XTREME SYSTEM (PN 14470):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2054)
1 Passenger Side Muffler Assembly (16CS2053)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
4.0” XTREME SYSTEM (PN 14959):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2071)
1 Passenger Side Muffler Assembly (16CS2070)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
NOTE: IMPORTANT-Make sure
that the small drain or weep hole
in muffler faces down when
muffler is installed.
2009+ Corvette C6
Please be sure to review the attached instructions prior to beginning the
installation process. If you have any questions about the enclosed parts,
instructions or encounter a problem during installation, call CORSA
Performance Technical Assistance at 800.486.0999. Do not attempt to make any
modifications to parts as this will void your warranty.
Technical Assistance:
(800) 486-0999
(PN 14108BLK)
Recommended Tools:
• 13 mm Socket
• 15 mm Socket
• 18 mm Socket
• 15 mm Open End Wrench
• Torque Wrench
(20-100 ft.-lb.)
• Drive extensions for Ratchet
(MINIMUM OF 17 INCHES)
CORVETTE C6
1
CORSA Performance • 140 Blaze Industrial Parkway • Berea, Ohio 44017-2930 • P. 800.486.0999 • F. 440.891.1868
E-mail: sales@corsaperf.com • www.corsaperf.com
INS5118 2/14/11
Exhaust System Installation
CAUTION: Prior to installation, be sure your vehicle is parked on a level surface, and the exhaust system
is cool. For safety purposes and ease of installation, we urge you to take your vehicle to a qualified
service center or muffler installer that employs the use of a lift.
INSTALLATION NOTE: Be sure to apply the provided anti-seize lubricant to all bolts, fasteners and
clamps. A pouch is included with the hardware kit. Apply the supplied anti-seize lubricant to the
threads ONLY of all TORCA band clamps. Failure to follow this procedure can cause the nuts to seize
on clamps and potentially damage threads. WARNING: Be sure to thoroughly clean hands after use.
Anti-seize lubricant will tarnish stainless steel parts.
All Torca clamps should be tightened using a properly calibrated Torque Wrench. Using an air impact
gun will damage the clamp and reduce its ability to effectively seal the joint. It may also cause the joint to
separate thereby causing damage to your exhaust system and your vehicle.
PARTS LIST
SPORT SYSTEM (PN 14108):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2067)
1 Passenger Side Muffler Assembly (16CS2068)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
TOURING SYSTEM (PN 14113):
(SPORT + CONVERSION KIT)
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2067)
1 Passenger Side Muffler Assembly (16CS2068)
2 Tunnel Muffler Assemblies (16CS2006)
1 H-Pipe Assembly (16CS4124)
Hardware Kit (16CS7004):
4 Torca Clamps 2.5”
1 Package Anti-Seize
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
CONVERSION KIT (PN 14310):
2 Tunnel Muffler Assemblies (16CS2006)
1 H-Pipe Assembly (16CS4124)
Hardware Kit (16CS7004):
4 Torca Clamps 2.5”
1 Package Anti-Seize
3.5” XTREME SYSTEM (PN 14470):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2054)
1 Passenger Side Muffler Assembly (16CS2053)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
4.0” XTREME SYSTEM (PN 14959):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2071)
1 Passenger Side Muffler Assembly (16CS2070)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
NOTE: IMPORTANT-Make sure
that the small drain or weep hole
in muffler faces down when
muffler is installed.
2009+ Corvette C6
Please be sure to review the attached instructions prior to beginning the
installation process. If you have any questions about the enclosed parts,
instructions or encounter a problem during installation, call CORSA
Performance Technical Assistance at 800.486.0999. Do not attempt to make any
modifications to parts as this will void your warranty.
Technical Assistance:
(800) 486-0999
Recommended Tools:
• 13 mm Socket
• 15 mm Socket
• 18 mm Socket
• 15 mm Open End Wrench
• Torque Wrench
(20-100 ft.-lb.)
• Drive extensions for Ratchet
(MINIMUM OF 17 INCHES)
CORVETTE C6
1
CORSA Performance • 140 Blaze Industrial Parkway • Berea, Ohio 44017-2930 • P. 800.486.0999 • F. 440.891.1868
E-mail: sales@corsaperf.com • www.corsaperf.com
INS5118 2/14/11
Exhaust System Installation
CAUTION: Prior to installation, be sure your vehicle is parked on a level surface, and the exhaust system
is cool. For safety purposes and ease of installation, we urge you to take your vehicle to a qualified
service center or muffler installer that employs the use of a lift.
INSTALLATION NOTE: Be sure to apply the provided anti-seize lubricant to all bolts, fasteners and
clamps. A pouch is included with the hardware kit. Apply the supplied anti-seize lubricant to the
threads ONLY of all TORCA band clamps. Failure to follow this procedure can cause the nuts to seize
on clamps and potentially damage threads. WARNING: Be sure to thoroughly clean hands after use.
Anti-seize lubricant will tarnish stainless steel parts.
All Torca clamps should be tightened using a properly calibrated Torque Wrench. Using an air impact
gun will damage the clamp and reduce its ability to effectively seal the joint. It may also cause the joint to
separate thereby causing damage to your exhaust system and your vehicle.
PARTS LIST
SPORT SYSTEM (PN 14108):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2067)
1 Passenger Side Muffler Assembly (16CS2068)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
TOURING SYSTEM (PN 14113):
(SPORT + CONVERSION KIT)
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2067)
1 Passenger Side Muffler Assembly (16CS2068)
2 Tunnel Muffler Assemblies (16CS2006)
1 H-Pipe Assembly (16CS4124)
Hardware Kit (16CS7004):
4 Torca Clamps 2.5”
1 Package Anti-Seize
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
CONVERSION KIT (PN 14310):
2 Tunnel Muffler Assemblies (16CS2006)
1 H-Pipe Assembly (16CS4124)
Hardware Kit (16CS7004):
4 Torca Clamps 2.5”
1 Package Anti-Seize
3.5” XTREME SYSTEM (PN 14470):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2054)
1 Passenger Side Muffler Assembly (16CS2053)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
4.0” XTREME SYSTEM (PN 14959):
1 Driver Side Over-the-Axle Pipe (16CS4126)
1 Passenger Side Over-the-Axle Pipe (16CS4113)
1 Driver Side Muffler Assembly (16CS2071)
1 Passenger Side Muffler Assembly (16CS2070)
Hardware Kit (16CS7024):
2 Torca Clamps 2.5”
1 Package Anti-Seize
2 Vacuum Caps
NOTE: IMPORTANT-Make sure
that the small drain or weep hole
in muffler faces down when
muffler is installed.
2009+ Corvette C6
Please be sure to review the attached instructions prior to beginning the
installation process. If you have any questions about the enclosed parts,
instructions or encounter a problem during installation, call CORSA
Performance Technical Assistance at 800.486.0999. Do not attempt to make any
modifications to parts as this will void your warranty.
Technical Assistance:
(800) 486-0999
(PN 14959BLK)