Owners manual

05/07/2014
INS5282
CORSA Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: [phone] · F: [phone]
2
E - M a i l : s a l e s @ c o r s a p e r f o r m a n c e . c o m · w w w . c o r s a p e r f o r m a n c e . c o m
Exhaust System Installation
Clamp On Tip Assembly
2014-Current C7 Corvette
PN’s 14062, 14062BLK, 14063, 14063BLK
Polished & Black Quad 4.5” Pro or Poly Tips
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
muffler installer who has the necessary equipment, tools and experienced personnel. However, if you decide to
perform this install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 3/8” drive ratchet
 3/8” drive 15mm deep socket
 3/8” drive 13mm deep socket
 Short extension (3”)
 Long extension (10”)
 13mm wrench
 Torque Wrench
 Safety glasses
Please confirm that all parts are present before beginning the factory exhaust system removal and CORSA exhaust
system installation.
Bill of Materials
1. Tip Assembly:
14062/14062BLK (Quad 4.5” Pro Series Tip Asm.)
14063/14063BLK (Polygon Tip Asm.)
2. 16CN7017 – Tip Hardware Kit