Installation Instructions

ManualsBrandsCorrigan Studio ManualsCeiling LightsCandice 12 - Light Sputnik Sphere Chandelier

Installation and Wiring Instructions:

NOTE：ALWAYS TURN POWER OFF BEFORE INSTALLING LIGHTING FIXTURE

IMPORTANT：YOU SHOULD USE A QUALIFIED ELECTRICIAN TO INSTALL THIS FIXTURE

Installation

1.Assemble the 12pcs Lampholder Pole(A) on the

Ball(B) with screws in the accessories bag.

2.Fix the Mounting Plate(K) to the Outlet Box(D)

with Box Screw(G).

3.Wiring:

1).Parallel connect the Lampholder Wire(C) with the

Fixture Wire(D), which is supplied in the

accessories bag. White connect with white and

black connect with black. Then connect the white

Fixture Wire(D,Neutral Wire) to the outlet box

supply wire(White). Connect the other half of the

Fixture Wire(D) that is black(Live Wire) to the outlet

box supply wire (Black or Red). Use wirenuts

provided.

2).Connect the Fixture Ground Wire(F) and Outlet

Box Supply Ground Wire(E) to Mounting Plate(K)

with GREENhex-head ground screw to appendex

hole in mounting plate marked “GND”.

3).Spread the electrical supplies so that the black

wire are on one side of the outlet box and white

wire are on the other side.

4.Fix the Ceiling Canopy(J) to the Mounting

Plate(K) with Mouting Screw(L) and Screw Cap(I).

Recommendation: Maximum 60 WATT Type

ST64 or ST58 bulb(12 pcs bulbs included. Pls take

care when assembling as it’s fragile).

Cleaning of your lamp:

Turn power off.Wipe with a damp cloth.Do not use

abrasives.

Outlet

Box(D)

Neutral

Wire

Live Wire

Outlet Box

Supply

Ground

Wire(E)

Fixture

Ground

Wire(F)

Ceiling Canopy(J)

Fixture Wire(D)

Ground Screw(H)

Box Screw(G)

Mounting

Screw(L)

Screw Cap(I)

Mounting

Plate(K)

Lampholder Pole(A)

Ball(B)

Lampholder Wire(C)

*SAVE THIS INSTRUCTION FOR FUTURE REFERENCE.

MADE IN CHINA