Furniture FAQ

Slate Marble:
* Because slate is a natural substance, tops vary in color and should not be expected to match from one top to
another.
* The surface is sealed, thereby is impregnable to all liquids and demands very little maintenance. As the slate is
made in layers there can be some natural chipping and rub off, which will only add to the beauty of this product. If you
wish, a liquid floor wax can be applied to bring out the natural beauty of the slate.
Marble Granite and other stone surfaces:
* Clean stone surfaces with a mild liquid dishwashing detergent and warm water. Use a soft cloth. Too much soap
may leave a film and cause streaks. Do not use products that contain lemon, vinegar, or other acids. Rinse the
surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently.
Do not use scouring powders or creams; these products contain abrasives that may scratch the surface.
Metal:
* Metal frames and decorations are protected with a clear top coating.
* Natural metal finishes can be cared for with common non-abrasive household cleaners.
* Painted finishes could have been applied with powder coating, painting, or other techniques. They are generally
protected with a clear top coating. These can be cared for by simple dusting. Clean with mild soap and water when
necessary. Be very careful to avoid scratching or chipping these surfaces.
Parchment & shagreen:
* Clean with mild soap and a damp cloth.
+ Do your glider and ottoman upholstery fabrics have a stain-repellent finish?
Since the safety of stain-repellents around children has not been established, we do not treat our upholstery with
stain-repellents.
+ How does the crib convert to a toddler bed?
With the purchase of a toddler bed conversion kit, you can convert your crib to a toddler bed. Simply remove one long
side of the crib and replace with the toddler gate included in your toddler bed conversion kit.
+ What size mattress do I need for my crib and toddler bed?
A standard full size crib mattress measuring at minimum 51 5/8” in length, 27 1/4” in width and between 4”- 6” thick.
How can I get a copy of the assembly instructions?
A. Look for specific assembly instructions on the product page.