User's Manual
File : CS-SUP-MUTI-WTHERMSPETEC-E02.sxw
1 PRESENTATION OF THE WAVETHERM MODULE
WaveTherm refers to a range of wireless remote temperature measuring devices, based on
Wavenis
®
Ultra Low Power radio technology of CORONIS offering several years of autonomous
battery operation.
The industrial design of the WaveTherm module guarantees exceptional
communication reliability in harsh working environments and has been optimised
to enable large-scale production.
1.1 CHARACTERISTICS
➢ Technical characteristics
• LOS radio range up to 1 km.
• ISM bandwidth 433 / 868 / 915 Mhz with fixed frequency or frequency hopping.
• Digital frequency modulation (GFSK)
• Communication speed: up to 9.6 Kbits/ sec.
• Receiver sensitivity : -110dBm (BER = 1%, 9.6 kps)
• Transmission power +14 dBm with internal aerial.
• Uses the secure communication protocol WAVENIS
®
• CE approval : EN 300-683
• ART certification : EN 300-220-1
Attention: WaveTherm modules do not interfere with other electronic (fixed or wireless)
systems installed close by.
Furthermore, based on our present knowledge, it represents no health risk whatsoever for
persons working occasionally or regularly within the operating radius.
➢ Physical characteristics
• Protection index :
IP65 : totally protected against dust and water spray and splashing from all
directions.
or IP68 : totally protected against dust and prolonged immersion under certain
conditions.
• Operating temperature range : [-20°C ; +70°C]
• Storage temperature: [ 0 ; +50°C ] (*)
• Probe connection cable: 2 m.
• Dimensions (H/W/D) : 12 x 4 x 3 cm
• Weight : 110g to 160g
• A diagram indicating the physical size of the unit is provided in appendix A.
(*) High storage temperatures may result in battery passivation problems.
The ideal storage temperature is between 10°C and 30°C.
➢ Electrical characteristics
WaveTherm module technical specifications page 4 of 31