User's Manual

File : CS-SUP-MUTI-WTHERMSPETEC-E02.sxw
5.5.2 SET A NEW WAKE-UP PERIOD
The WaveTherm module wake-up default setting is every second. The wake-up period may be easily
modified by entering a new value in the “default wake-up period parameter'.
Attention, the value associated with this parameter may not exceed 10 seconds.
5.5.3 SET A FIXED WAKE-UP PERIOD FOR CERTAIN DAYS OF THE WEEK
The wake-up system parameters may be set to allow disabling of WaveTherm module periodic wake-up for
certain days of the week.
In practice, when periodic wake-up is disabled, the WaveTherm polls every 10 seconds.
The parameter setting procedure is as follows :
 disable periodic wake-up for certain days, with the 'Enable periodic wake-up for certain days of
the week' parameter.
 Enable selection of the days of the week, with the 'wake-up system status word' parameter;
'wake-up system status word' = 0x02
In this way, on days when periodic wake-up is disabled, the module polls every 10 seconds, whereas for the
rest of the week the module wakes up at the default period setting.
5.5.4 SET DAY/NIGHT SYSTEM PARAMETER WITHOUT DISTINCTION OF DAYS OF
THE WEEK
The wake-up system parameters may be set to enable configuration of the time windows with different wake-
up periods
The time windows function as follows,
 Set the start time for the first time window and its wake-up period ;
 Set the start time for the second time window and its wake-up period ;
 Select the days of the week during which the time windows are enabled ;
 Validate the time window mode with the 'wake-up system status word'.
5.5.5 SET THE DAY/NIGHT SYSTEM PARAMETERS ACCORDING TO DAY OF THE
WEEK
The day/night system according to the day of the week parameter setting procedure is the same as that
described in the previous chapter with the exception that the “Enable time window according to the day of the
week” parameter is only set for days required.
For example, we wish to enable the time window from Monday to Wednesday.
The 'Enable time windows according to day of the week' parameter is set to 0x07.
In this way, the module wakes up during these time windows for a period set in the associated parameters
with a specific start time for each window from Monday to Wednesday.
For the other days of the week, the wake-up mode depends on the 'wake-up system status word' :
 the rest of the week, the module uses the default wake-up period.
 periodic wake-up disabled (polling every 10 sec.)
WaveTherm module technical specifications page 27 of 31