User's Manual

RTM Elster AMCO applicative PFS Coronis Systems
4.3.5.Leakage Detection Status
This control byte is used to detect leakage in real time. Indeed, each bit is set to one when a leakage is
detected and reset to zero automatically when it ended. This information can be read by the standard read
parameter command. This parameter is in read access only.
 RTM Elster AMCO pulse
Leakage Detection Status (internal parameter ID = 0x02)
Bit Number
Bit 7
(MSB)
bit 6 bit 5 bit 4 bit 3 bit 2 bit 1
Bit 0
(LSB)
Bit Definition
High
threshold
(extreme
leak)
Port D
Low
threshold
(residual
leak)
Port D
High
threshold
(extreme
leak)
Port C
Low
threshold
(residual
leak)
Port C
High
threshold
(extreme
leak)
Port B
Low
threshold
(residual
leak)
Port B
High
threshold
(extreme
leak)
Port A
Low
threshold
(residual
leak)
Port A
Pulse profile
X X X X X X X X
The coding is as follows : 0 -> not detected
1 -> detected
 RTM Elster AMCO encoder
Leakage Detection Status (internal parameter ID = 0x02)
Bit Number
Bit 7
(MSB)
bit 6 bit 5 bit 4 bit 3 bit 2 bit 1
Bit 0
(LSB)
Bit Definition
Not used Not used Not used Not used
High
threshold
(extreme
leak)
Port B
Low
threshold
(residual
leak)
Port B
High
threshold
(extreme
leak)
Port A
Low
threshold
(residual
leak)
Port A
encoder profile
0 0 0 0 X X X X
The coding is as follows : 0 -> not detected
1 -> detected
EVO RTM-UserMan 20