User's Manual

RTM Elster AMCO applicative PFS Coronis Systems
4.3.2.Operating Mode
The “Operating Mode” is used to activate/deactivate each RTM Elster AMCO feature. This parameter is
accessible through the command write parameters (described in section 4.2.2).
“Operating Mode parameter is systematically returned in generic header present in almost each response
frame of the RTM Elster AMCO.
RTM Elster AMCO pulse
Operating Mode (no ID for this internal parameter)
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8
Not
used
Not
used
Network
configuration
00: Fixed Network
01: Drive by/ Walk by
10: Drive By (only)
11: Walk By (only)
Bubble-Up
management
0 : deactivated
1 : activated
TOU Buckets
management
0 : deactivated
1 : activated
Not used
Not used
Operating Mode (no ID for this parameter)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Not used
Extreme leak
detection
0 : deactivated
1 : activated
Residual leak
detection
0 : deactivated
1 : activated
Tamper
detection
0 : deactivated
1 : activated
Datalogging
00 : deactivated
01 : time steps mngt
10 : once a week mngt
11 : once a month mngt
Ports management
00 : 1 Port (A)
01 : 2 Ports (A,B)
10 : 3 Ports (A, B, C)
11 : 4 Ports (A, B, C, D)
RTM Elster AMCO encoder
Operating Mode (no ID for this internal parameter)
bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8
Not
used
Not
used
Network
configuration
00: Fixed Network
01: Drive by/ Walk by
10: Drive By (only)
11: Walk By (only)
Bubble-Up
management
0 : deactivated
1 : activated
TOU Buckets
management
0 : deactivated
1 : activated
Encoder
filtering algorithm
management
0 : deactivated
1 : activated
Back flow
detection
0 : deactivated
1 : activated
Operating Mode (no ID for this internal parameter)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Encoder
misread
detection
0 : deactivated
1 : activated
Extreme leak
detection
0 : deactivated
1 : activated
Residual leak
detection
0 : deactivated
1 : activated
Encoder
communication
fault detection
0 : deactivated
1 : activated
Datalogging
00 : deactivated
01 : time steps mngt
10 : once a week mngt
11 : once a month mngt
Ports management
00 : one Port (A)
01 :2 Ports (A & B)
EVO RTM-UserMan 17