Spec Sheet

Everon 6000 Specification Sheet
Everon 6000 data sheet P-N CE0012001 15-Jan-2021.docx|
CORNING | Everon 6000 | Specification Sheet P/N :CE0012001 |Page 4 of 24
DRU – Digital Routing Unit
The DRU - Digital Routing Unit is the Everon 6000 central Hub and Distribution element. The DRU interfaces between
the DCM modules and the IHU Radio Interface Frames, allowing to receive the operators service signals in CPRI
format, and to route these signals to the remote antenna units. The DRU supports all Corning digital remote antenna
units’ flavours, for all services, power levels and antenna configurations (SISO or MIMO). Each DRU includes 4 SFP+
ports connected to the DCMs and 32 SFP+ ports for connection to the remote units. When more remote antenna units
are needed, the system scales up easily by adding additional system modules.
LRU - Low power Remote Unit
The LRU is a low power remote antenna unit with 20 dBm per MIMO stream per band output RF power and native
support of 2x2 MIMO antenna scheme. Two types of LRU are available:
Low band LRU - supports 600 MHz (band 71), 700 MHz Low (band 12), 700 MHz High (bnad13), FirstNet (band 14),
800/850 MHz (band 26) bands via one SFP+ connection.
Medium Band LRU - supports EAWS (band 66), PCS (band 25), WCS (band 30) and 2.5GHz TDD (band 41) services via 3
SFP+ connections.
The LRU cooling is natural convection with no fans. Due to its IP66 enclosure design the LRU can also be installed
outdoors.
MRU – Medium-power Remote Unit
The MRU is a medium power modular remote antenna unit with a single antenna port. The output power for the
lower bands: 600/700 MHz Low/700 MHz High/FirstNet, 800/850 MHz is 33 dBm and the output power for the
medium bands EAWS, PCS, WCS and 2.5GHz TDD is 37dBm.
Two SFP+ connections are used to support all the bands. The MRU modular structure and integrated high-
performance cavity based multiplexing functionalities, enable setups of up to 6 RF modules, for a variety of licensed
frequency bands within a single cabinet.
The MRU also provides CBRS/C-Band ready RF interface for future field upgrades.
HRU – High-power Remote Unit
The HRU is a high power modular remote antenna unit which provides 43 dBm output RF power per service module,
and native support of 2x2 MIMO antenna scheme. The HRU modular structure enables set ups of up to 8 service
modules in 600/700 MHz Low/700 MHz High/FirstNet, 800/850 MHz, EAWS, PCS, WCS and 2.5GHz TDD.
The HRU cooling is based on natural convection, with no fans. Due to its IP65 enclosure design the HRU can also be
installed outdoors.