Spec Sheet

Everon 6000 Specification Sheet
Everon 6000 data sheet P-N CE0012001 15-Jan-2021.docx|
CORNING | Everon 6000 | Specification Sheet P/N :CE0012001 |Page 3 of 24
System architecture -Everon 6000 |
Radio Interface Frames (Point of Interface)
Radio Interface frames are modular chassis used for interface between the base stations and the Everon 6000. A
system may be comprised of two types of Chassis: IHU (Integrated Head-end Unit) and HEU (Head End Unit). The IHU
can interface up to 8 RF duplexed ports (or 16 UL/DL simplex ports) and can be expanded by an HEU radio interface
frame which provides interface capabilities for additional 12 RF duplexed ports (or 24 UL/DL simplex ports). The
following modules are used with the radio interface frames:
• RIMe (Radio Interface Module Enhanced ) - provides an interface and signal conditioning to signals coupled
between the signal source RF antenna ports and the Everon 6000 (uplink and downlink)
• DCM (Digital Conversion Module) - Provides RF to CPRI (Downlink) and CPRI to RF (Uplink) conversion, where the
well-known CPRI (Common Public Radio Interface) standard is used for representing the RF signals. Each DCM
may convert signals capturing up to 190 MHz aggregated bandwidth.
• RIX (Radio Interface Expander) – combines downlink signals of the HEU and IHU RIMe’s and provides the
combined signals to the OIX, splits uplink signals arriving from the OIX to the HEU and IHU RIMe’s.
• OIX (Optical Interface Expander) – combines downlink signals arriving from the HEU RIX and the IHU RIX and splits
the uplink signal for the HEU RIX and the IHU RIX uplink ports.
• PSM (Power Supply Module) – provides power to the radio interface frame
• dHCM (Digital Head-End Control Module) is a “master” frame controller
• ACM (Auxiliary Control Module) is a “slave” frame controller controlled by the dHCM