User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 129 of 174
5.1.3.2 Security
Access security is provided by definitions of user groups created by the system administrator. Groups are
used to limit access to specific devices so that only devices allocated to a group are accessible by members of
that group.
The Security tab allows the definition of the groups and the system users. The following three types of users
are supported:
x System administrator: Single user of the highest level that can create groups with dedicated group
administrators. Only the system administrator can create new groups.
x Group administrator: Automatically created for each group that is created by the system administrator.
x Group users: Defined by the corresponding group administrator. Five hard-coded access levels are
available per group:
Table 28: Group Users Access Levels
Level
Description
Operator
R/O access to Devices and Events screens.
Installer
R/O Access to Devices and Events screens.
Write access to
free text parameters to allow the definition of location and identification
information.
RF Tech
Access to the Devices, Config, Events and Channels screens:
x Write access to all RF parameters.
x R/O to all other parameters.
IT Tech
Access to the Devices and Admin screens:
x Write access to all non-RF parameters.
x Access to activity logs of all users and groups.
Groups and
access levels
Operation
buttons
Session
timeout