User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 99 of 174
4. Initial Commissioning
This section describes all the initial configurations that must be done by the system administrator.
4.1 Create new user groups
Initially the system administrator is the only system user. In order to enable other users to log in to the
system, the system administrator must create user groups for the different providers/carriers.
When a new group is created the administrator of the new group must log in to add users to the group.
Only the system administrator can create new groups.
For more information about system security refer to section 5.1.3.2.
¾ To create a new group
1. Log in as the system administrator.
2. In the main menu bar, click Æ
3. Click the button Æ enter the new group name (alphanumeric characters only, no
spaces) and click OK. Up to 31 groups can be created.
4. The new group name is added to the list of defined groups and the group administrator is automatically
created with the following default authentication:
x Username: admin
x Password: admin
x Group: group name
Note: Default Passwords should be changed when the relevant users first log in to the
system. See password changing flow below. System admin can't change the group admin
password.