User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 98 of 174
Make sure the address format matches IPv4 or IPv6, according to the tab being updated.
For Dynamic IP Address — set DHCP as Client, then click OK.
5. The HCM restarts after the LAN IP address is updated.
6. To open a remote management session: Open a browser and enter the LAN port IP Address in the address
bar.
Note: A Ping Tool option is provided to verify access to IP hosts (rather than opening another
application). For more information about the ping tool and the IP Settings tab refer to section
5.1.3.6.