User's Manual

Navigating the Management Application
Voasis™ UMTS/DCS/PCS Installation and Configuration Manual 39
VAP Events
Alarms Description
Downlink Adjustment RED – adjustment procedure failed
Apod Faulty RED - VCU fault. Remove and re-apply power to VCU. If problem
persists, replace VCU.
Overall Status Status of highest fault.
Temperature too high The device temperature exceeds a threshold
Service shut down RED - Service off according to user request
6.5 VAP RF Configuration
Field Description
Service Type Read Only. Set according to the system type: UMTS, PCS or DCS.
Service control Set to Enable in current version.
DL Pout Level DL output power levels, where Level 0 is not attenuated at all (14dBm).
Identify Not implemented in this version.
Corresponding LEDs on VCU and Access POD Flicker quickly.
Reset Future option for software reset of the unit.