User's Manual

Navigating the Management Application
Voasis™ UMTS/DCS/PCS Installation and Configuration Manual 35
6.3.1 General Tab
This tab provides the user assigned VCU name and IP parameters. In addition, it displays the
hardware and software versions of the unit.
To access the Configuration - General Tab
In the Topology Tree, click the Control Unit, Configuration tab at the top of the window and
click the General sub tab.
Parameter Description
Name VCU name (i.e. Meeting Room, Lobby, etc.)
Serial Number Factory set unit number
SW Version Active SW version
Product Revision Hardware revision of product.
IP Address VCU IP. Default = 192.168.1.1. can be modified by the user
according to network.
Subnet Mask VCU subnet mask. Default = 255.255.255.255.
Default Gateway Gateway IP. Default = 192.168.010.245
MAC Address VCU MAC address
DHCP Not applicable.