User's Manual

Voasis™ Access Pod (VAP) Installation and Monitoring
Voasis™ UMTS/DCS/PCS Installation and Configuration Manual 29
5.4 Configuring the VAPs
To configure the VAPs parameters use the Voasis™ configuration application.
Note: See chapter
6 for full explanation about navigating the Voasis™ configuration application.
1. Open the Voasis™ configuration application (web interface). In the invoked Login window
select your User Name and type in your password:
See section
6.1 for Usernames and Passwords list.
2. For EACH VAP: (1) Choose the General sub tab, (2) Choose the VAP to be configured, (3) In
the work area enter the VAP name (i.e. Conference Room, Lobby, etc.)
After all the VAPs names are set, verify the system connections by following the next section
(
5.5)
1. Select the VAP
to be configured
2. Select the
General tab
3. Set the VAP
name