User's Manual

VCU Installation and Configuration
Voasis™ UMTS/DCS/PCS Installation and Configuration Manual 23
4.4 Voasis™ Control Unit Configuration
Note: After the initial configuration, the VCU can be accessed remotely via the Ethernet.
1. Open a web browser and type in the address bar the default IP address. (192.168.1.1)
2. On the invoked application window, choose the Configuration main tab, click the General
tab at the bottom of the pane.
3. Define the
name and click Apply:
4. Click the RF Config tab (at the bottom of the Configuration pane).
IP Address
Name