User's Manual

VCU Installation and Configuration
20 Voasis™ UMTS/DCS/PCS Installation and Configuration Manual
4. Click the Search icon
in the toolbar to discover the connected VCU and list it in the
window.
Note: If you are connected to the network, all the VCUs in the network will be discovered
and the procedure may take several seconds for the list of devices to be displayed in the
device list.
The right pane will show the currently connected VCU(s) according to its IP Address and
MAC Address (Hardware Address), in addition to other information.
In the left pane, the discovered units are listed under the corresponding Xport version (your
display will probably show a single Xport version and the unit(s) will be listed under that
item).
5. In the left pane, double-click on the IP address to which a Telnet session is to be opened.
MAC address
IP address