User's Manual

VCU Installation and Configuration
Voasis™ UMTS/DCS/PCS Installation and Configuration Manual 19
4.3.2 Opening a Telnet Session to a Unit
This section describes how to open a Telnet session to a VCU using the Lantronix Device
Installer application.
To open a telnet session to a unit
1. Verify that the laptop IP is set to the same subnet as the static IP address assigned to the
Controller (e.g. 192.168.1.2), as performed in section
4.2.1.
2. Use an Ethernet cross-cable to connect your computer (running the DeviceInstaller) to the
VCU Ethernet port.
(Some computers may not require a cross-cable for a connection since
the cross-cable function is built-in).
3. Launch the DeviceInstaller application on your computer:
• Click the Start menu, select Lantronix and choose DeviceInstller or
• Click the application icon on your desktop (if you’ve created a shortcut)
The DeviceInstaller main window appears.
Ethernet cross cable