User's Manual

VCU Installation and Configuration
Voasis™ UMTS/DCS/PCS Installation and Configuration Manual 17
4.2.3.1 Remotely determining the VCUs IP address
Use this method if the IP address is known.
If the VCU MAC address is known
1. Launch the Lantronix DeviceInstaller application.
2. Click the Search icon
in the toolbar to discover all connected VCUs.
Note: the procedure may take several seconds for the list of devices to be displayed in the
device list.
3. Locate the unit IP Address according to its Hardware Address (MAC address).
4.2.3.2 Locally Determining the VCU’s IP Address
Use this method if the VCU’s IP address is NOT known.
If the VCU MAC address is NOT known
1. Connect to the unit locally and open a Telnet session to the corresponding unit using the
Lantronix DeviceInstaller as explained in section
4.3.2.
Note: Some computers may not require a cross-cable since the option is automatically built-
in. In this case, you may use a standard Ethernet cable.
2. After performing the discovery action, the unit information will be displayed in the
application main menu, including the IP address.
Ethernet cross cable
MAC address
IP address
MAC address
IP address