User's Manual

VCU Installation and Configuration
16 Voasis™ UMTS/DCS/PCS Installation and Configuration Manual
3. On the invoked application window, choose the Configuration main tab and click General.
4. Define the IP Address parameters according to instructions given by your network manager:
• IP Address
• Subnet Mask
• Default Gateway
Note: After IP address configuration, the VCU can be accessed remotely via Ethernet. To
continue the configuration session locally, configure the laptop to the same Subnet as
configured for the VCU.
4.2.3 Lost the VCU IP Address?
Note: It is recommended to record the IP address and corresponding MAC address of each unit.
If you lost your VCU IP address:
1. Install the Lantronix DeviceInstaller (see 4.3.1).
2. Do you know the unit’s MAC address?
• If the unit MAC address is known – follow the instructions in section
4.2.3.1.
• If the unit MAC address is NOT known – follow the instructions in section
4.2.3.2.