User's Manual

VCU Installation and Configuration
Voasis™ UMTS/DCS/PCS Installation and Configuration Manual 15
The Internet Protocol (TCP/IP) Properties dialog appears.
• Assign an IP
address within the following range: 192.168.1.2 to 192.168.1.250. (i.e.
192.168.1.9).
• Set the Subnet mask as shown: 255.255.255.0
5. Click OK.
6. Configure the VCU IP address according to the following sections.
4.2.2 Configuring the VCU IP Address
To configure the VCU static IP parameters
1. Connect a laptop to the VCU Management port via an Ethernet cross-cable.
Note: Some computers may not require a cross-cable since the option is automatically built-
in. In this case, you may use a standard Ethernet cable.
2. Open a Web browser and in the address bar, type the default IP address (192.168.1.1).
Note: The laptop must be pre-configured to the same Subnet as the default VCU IP address.