User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsVE LTE 700MHz MIXED BAND MIMO

Table Of Contents

Preface Material
Policy for Warrantee and Repair
General Warranty
Specific Product Warranty Instructions
Returns
Limitations of Liabilities
Reporting Defects
Safety Warnings
Compliance with RF Safety Requirements
Certification and Compliance to Standards
About This Guide
List of Acronyms
Table of Contents
1 Overview
- 1.1 Key Features and Capabilities
- 1.2 System Architecture
- 1.3 System Elements
  - 1.3.1 VE Control Unit (VCU)
    - 1.3.1.1 VCU Front Panel
    - 1.3.1.2 VCU Rear Panel
  - 1.3.2 VE Access Pod (VAP)
- 1.4 System Monitoring and Management
  - 1.4.1 Integration with an External Fault Management System
2 Installation Workflow
3 Infrastructure Requirements and Layout Planning
- 3.1 General Information on Location and Connections
- 3.2 Infrastructure Requirements
- 3.3 Coverage and Installation Planning
  - 3.3.1 Types of Environments
- 3.4 Planning VAP Layout
4 VCU Unit Installation and Provisioning
- 4.1 VCU Kit Contents
- 4.2 VCU Physical Installation
  - 4.2.1 Master VCU Installation
    - 4.2.1.1 Master/Stand-Alone VCU Alarm Output Connections
  - 4.2.2 Slave VCU Installation
- 4.3 Ethernet Cable Connections to VAPs
  - 4.3.1 Shifting Relevant Ethernet LAN Connections
  - 4.3.2 Operation with LAN utilizing Power over Ethernet (PoE)
- 4.4 Provisioning the VE Control Unit
5 VAP Installation and Provisioning
- 5.1 VAP Installation
- 5.2 Desk and Wall Mount VAP Installations
- 5.3 Verifying VAP Coverage Area
- 5.4 Naming the VAPs, Verifying Connections and Monitoring
- 5.5 Provisioning the VAPs
  - 5.5.1 Verifying Normal VAP Operation
  - 5.5.2 Naming the VAP
6 Navigating the Web Access Application
- 6.1 Opening a Session and Authentication Levels
- 6.2 About the MobileAccessVE Web Access Window
- 6.3 Configuration Tab
  - 6.3.1 Network Topology Tree
    - 6.3.1.1 Removing Network Element from Baseline
  - 6.3.2 Configuration Display Area
- 6.4 Management Tab
7 VCU Monitoring and Configuration
- 7.1 Viewing VCU General Information
- 7.2 Viewing VCU Alarms
- 7.3 Master VCU RF Parameters
8 VAP Monitoring and Configuration
- 8.1 Viewing VAP General Information
- 8.2 Viewing VAP Alarms
- 8.3 VAP RF Parameters
9 Administrative Operations
- 9.1 Changing Password
- 9.2 Retrieving VCU IP Address
- 9.3 IP Settings
- 9.4 SNMP Configuration Parameters
- 9.5 Upgrading (or Downgrading) VCU and VAP Software
  - 9.5.1 Upgrading the VAP SW
  - 9.5.2 Upgrading the VCU SW
10 Troubleshooting
- 10.1 Finding a Specific VAP in the Building
- 10.2 Wireless Service is Not Available
- 10.3 PoE is Not Working
- 10.4 Ethernet Service is Degraded
- 10.5 No Service from Connected Access Pod
- 10.6 VCU Cannot be monitored via SNMP
Appendix A - Traps
Appendix B – MobileAccess VE MIB Tree Structure (Version 1.8)
- MobileAccess Version 1.13 MIBs/OID Descriptions

Troubleshooting

Mixed Band LTE 700 MHz MobileAccessVE Instant Coverage Solution User Manual 83

Module Node Name OID String Description

MaVE-

MIB

vapSerialNumber .1.3.6.1.4.1.15921.11.2.1.1.4 MA VAP Serial Number

MaVE-

MIB

vapProductRevision .1.3.6.1.4.1.15921.11.2.1.1.5 MA VAP Product revision

MaVE-

MIB

vapSWVersionActive .1.3.6.1.4.1.15921.11.2.1.1.6 MA VAP Active Software Version

MaVE-

MIB

vapSWVersionInactive .1.3.6.1.4.1.15921.11.2.1.1.7 MA VAP Inactive Software Version

MaVE-

MIB

vapReset .1.3.6.1.4.1.15921.11.2.1.1.8 MA VAP RESET

MaVE-

MIB

vapIdentify .1.3.6.1.4.1.15921.11.2.1.1.9 MA VAP Indetify

MaVE-

MIB

vapChannel1ServiceType .1.3.6.1.4.1.15921.11.2.1.1.10 MA VAP Service Type

MaVE-

MIB

vapChannel1ServiceControl .1.3.6.1.4.1.15921.11.2.1.1.11

MA VAP First channel Service control

(N/A in WiMAX)

MaVE-

MIB

vapChannel1DLPoutLevel .1.3.6.1.4.1.15921.11.2.1.1.12

MA VAP first channel DL output

attenuation Level

MaVE-

MIB

vapChannel1DLPoutActual .1.3.6.1.4.1.15921.11.2.1.1.13

MA VAP First channel DL Actual Output

Power - in 0.1 dBm means: (when

vapChannel1ServiceType <50 the value

is (dBm value *10) ; when

vapChannel1ServiceType >50 the value

is (dBm value + 100)*10

MaVE-

MIB

vapChannel1AntennaType .1.3.6.1.4.1.15921.11.2.1.1.14

MA VAP First channel Antenna Type

internal - external

MaVE-

MIB

vapChannel2ServiceType .1.3.6.1.4.1.15921.11.2.1.1.15 MA VAP Service Type

MaVE-

MIB

vapChannel2ServiceControl .1.3.6.1.4.1.15921.11.2.1.1.16

MA VAP Second Band Service control(N/A

in MIMO/SISO)

MaVE-

MIB

vapChannel2DLPoutLevel .1.3.6.1.4.1.15921.11.2.1.1.17

MA VAP Second channel DL output

attenuation Level

MaVE-

MIB

vapChannel2DLPoutActual .1.3.6.1.4.1.15921.11.2.1.1.18

MA VAP Second channel DL Actual

Output Power - in 0.1 dBm means:

(when vapChannel2ServiceType <50 the

value is (dBm value *10) ; when

vapChannel2ServiceType>50 the value is

(dBm value + 100)*10

MaVE-

MIB

vapChannel2AntennaType .1.3.6.1.4.1.15921.11.2.1.1.19

MA VAP Second channel Antenna Type

internal - external

MaVE-

MIB

vapAlarms .1.3.6.1.4.1.15921.11.2.1.1.20

MA VAP Alarms; Bits are as follow: For

non SISO/MIMO services: 1 - Channel1

Off ; 2 - Channel2 Off ; 4- DL Adjustment