User's Manual

Overview
Mixed Band LTE 700 MHz MobileAccessVE Instant Coverage Solution User Manual 2
Multi-tier installation includes the Master VCU that supports up to 12 Slave VCUs. In this type of
installation the provider’s services are fed to the Master VCU through which the Slave VCUs are
controlled and managed.
Figure 1-2. Multi-Tier VE Installation
1.1 Key Features and Capabilities
• Supports both LTE band SISO and MIMO configurations
• Supports the following LTE Band configurations:
• Upper C; Upper C (MIMO)
• Lower A,B,C; Lower A,B,C (MIMO)
• Upper C; Lower A,B,C (SISO)
• Lower A,B,C; Upper C (SISO)
• Individual gain and power settings for each band
• Simple installation - Deployed in only a few hours, with minimum disturbance to the
enterprise.
• VAPs connect over existing CAT-5e/6 cabling infrastructure and existing Ethernet jacks.
• VAPs are remotely powered using Power-over-Ethernet (PoE). Local power is not required.
• Minimum macro-network impact with low power distributed coverage.
• Seamlessly coexists with the Enterprise LAN and does not consume LAN capacity.
• Connects to all types of capacity sources, including BTS, picocells, femtocells, and BDAs.
• VAPs can easily be relocated for coverage modifications as needed.
• Ease of expansion provides “pay as you grow” scalability.
• Support of connected IP devices (Wi-Fi APs, IP phones, etc.) with Ethernet/IP pass through
and PoE maximizes placement flexibility.
• Remote end-to-end system monitoring, management, and configuration via a single
connection to the master VCU using a standard web browser and SNMP.
• Base Line feature that clearly shows VAPs/VCUs where communication has been lost.