Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsVE-CELL-PCSG SYSTEM
64656667686970717273
Troubleshooting
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 62
In the Config tab, click on the relevant Service RF sub-tab and verify that the Service
Control parameter is set to On.
Confirm that the VCU port is functioning (VAP status LED associated with this Pod is
green).
In case external antennas are connected – verify the VAP was configured to use the
external antennas (see Antenna parameter in VAP Service RF sub-tab, shown above).
Selected VAP
Config tab