User's Manual

VAP Monitoring and Configuration
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 48
8 VAP Monitoring and Configuration
8.1 Viewing VAP General Information
The VAPs general information (such as unit name and SW versions) can be viewed in the Config
Module Info sub-tab.
To view VAP general information
Click the Config tab in the main menu and select the VAP from the network topology tree. The
Module Info sub-tab will be displayed by default.
The following information is displayed:
Field
Description
Name
User defined name for system element (up to 17 characters)
Serial Number
Factory set ID number
Product Revision
Revision number of VCU/VAP
SW Active Version
Version of the SW currently being used to manage and monitor
the system
SW Inactive Version
Version of other system SW version not in use
Identify Button
Enabling this option enables finding the physical location of the
selected element (see 10.1). When this option is set to ON, the
LEDs on the corresponding Access POD/VCU flickers.
Reset Button
SW reset of the unit
Note: VAP Name is saved in the VCU associated to the port to which the VAP is connected, such
that in case you replace a VAP, the new one will be associated with the same name.