User's Manual

VAP Installation and Provisioning
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 38
4. Refer to the Config Module info tab.
5. Assign each VAP a name as follows:
 Click the Modify button
 Type the unit name (up to 17 alpha-numeric characters) and click OK
6. When required to transmit the RF signal through a connected external antenna:
 Refer to the Service 1 RF and/or Service 2 RF tabs
 Enable the External Antenna option
Note: If the external antenna option is not enabled, the signal will be transmitted via the
integrated internal antenna, by default.
7. Verify the system connections according to the following section (section 6 ).
Click Modify button to
assign name