User's Manual

VCU Unit Installation and Provisioning
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 33
To assign a name to a Slave VCU:
1. Connect to the Master VCU unit (either locally as explained in section 4.4.1 or remotely) and
select the Slave VCU to be provisioned from the Network Topology Tree.
Each VCU has a default name of the form “VCUPx-name”, where:
 Px - Master VCU port number to which the Slave VCU is connected
 Name - user-defined name
2. To assign the Slave VCU an indicative name:
 Select the Module Info Tab
 Click the Modify button
 Type the unit name (up to 17 alpha-numeric characters) and click OK.
Click Modify
Selected Slave
VCU-