User's Manual

VCU Unit Installation and Provisioning
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 27
Note: See section  6.4 for a description of the Management tab.
5. Click the Modify button to define the STATIC IP Address according to existing LAN.
Note: After the initial IP configuration, the Master VCU can be accessed remotely via
Ethernet.
 Set the Static IP address parameter (DHCP is not currently available)
Default definitions:
• The Default IP Address : 192.168.1.1
• The Default Subnet Mask: 255.255.255.0
• The Default Gateway: 192.168.1.254
 Click OK.
6. Log out and then log in again with the new IP settings.
7. Select the Config tab in the main menu bar.
Note: See section
 6.3 for a complete description of the Config tab.